In Colorado Springs, hailstorms don’t arrive with a lot of warning. They come on quickly, sometimes in minutes, turning a peaceful afternoon into a damaging downpour. If your car was outside during one of these storms, chances are it didn’t make it through unscathed. From tiny surface-level dings to deep, widespread impact damage across multiple panels, hail leaves its mark. And when it does, you need a repair solution that doesn’t just hide the damage; you need a team that truly fixes it. We’ve seen the full range of storm-related vehicle damage, and we know how deceptive it can be. What may look like a few dents from a distance could actually be the beginning of paint failure, metal stress, or rust formation beneath the surface. That’s why we take hail damaged vehicles repair in Colorado Springs seriously, because the impact goes far beyond what you can see.
We understand that your vehicle is a major part of your life. It’s how you get to work, drop off your kids, run errands, and travel. That’s why we treat every car with the same attention to detail and commitment we’d give our own. We don’t just remove dents, we fully restore your vehicle’s shape, integrity, and protective coatings to extend its life and preserve its value.
Our approach is grounded in experience and focused on results. From high-end luxury cars to practical daily drivers, every vehicle we service is assessed individually. No two storm damages are exactly alike, and no two repair plans should be either. We customize each repair based on the type, severity, and location of the damage, making sure every dent, crease, or panel distortion is addressed completely.
Band-aid fixes don’t fly here. We don’t cover up damage or rush jobs just to check boxes. We apply tested, proven techniques using the right tools for each specific repair. That’s what sets us apart from general body shops. We know that in a place like Colorado Springs, where hailstorms are a regular reality, you need a shop that’s ready for every type of impact, every single time.
We’re not a generalist shop that just happens to offer hail repair; we’re specialists who do this work and nothing else. It’s our passion, our focus, and our promise. We don’t dilute our attention across 20 different kinds of automotive services. We invest all our time, training, and equipment into becoming the best at one thing: hail damaged vehicles repair in Colorado Springs.
That level of focus pays off in every detail of our process. It starts with an inspection, but not the kind most drivers are used to. Instead of a flashlight and a clipboard, we use advanced inspection lights and digital dent-mapping technology that reveals surface irregularities not visible to the naked eye. Our goal is to capture every single dent, no matter how small, so we can build an accurate estimate and eliminate surprises during the repair phase.
Why does this matter? Because insurance companies often base their estimates on only what they see. If your damage isn’t fully documented, you could be left paying for repairs out of pocket or receiving a subpar fix. We work hard to make sure that doesn’t happen. Our comprehensive documentation supports your claim and gives our technicians a precise roadmap to follow, so nothing gets missed and every area of impact is addressed.
Once your plan is approved, we move into the repair phase, where Paintless Dent Repair (PDR) takes center stage. PDR is the industry gold standard for removing hail dents without sanding, repainting, or replacing panels unnecessarily. Our technicians gently work the metal from behind the panel, using a set of specialized tools designed to restore your car’s natural shape without harming the factory finish. That means your vehicle retains its original paint, which is more durable and valuable than any aftermarket repaint.
When hail damages your vehicle, the physical dents and dings are only part of the challenge. The other side, the insurance claim process, is often just as frustrating, if not more. Filing a claim can be overwhelming. You’re expected to gather paperwork, schedule inspections, follow up with adjusters, and make sense of complicated policy language. We understand that stress. That’s why we do more than repair cars; we guide you through the full journey, start to finish.
Once you bring your vehicle to us, we begin with a detailed inspection and documentation process. We don’t just look for the obvious. We conduct a thorough evaluation of all visible and hidden damage using specialized lighting and scanning tools. We then prepare a professional damage report, complete with images and itemized repair notes. This isn’t just for our internal use; it’s what your insurance provider needs to approve the right level of coverage.
If your insurance adjuster’s estimate doesn’t reflect the true extent of the damage, which is very common, we step in and file what’s called a supplemental claim. Using our documentation, we demonstrate what was missed and push to ensure the total cost of the proper repair is covered. Our team communicates directly with the adjuster, answers technical questions, and advocates for your vehicle to be restored the right way.
Because we specialize in hail damaged vehicles repair in Colorado Springs, we’ve worked with nearly every major and regional insurance company. We understand how each of them operates, what documentation they require, and how to keep the claim process moving forward. That experience helps us anticipate and avoid delays, reduce approval times, and eliminate confusion for our customers.
Every hail-damaged vehicle we see carries its own story. Some come in with a few isolated dents. Others arrive looking like they’ve been through a war zone, with roof, hood, and trunk panels hammered by hailstones. But no matter the extent of the damage, our approach is the same: precision, care, and a focus on long-term results. Our job isn’t just to make your car look good again; it’s to make sure it performs, protects, and holds its value just like it did before the storm.
Colorado Springs drivers deal with hail storms more than most people across the country. And they know better than anyone that quick fixes and rushed repairs don’t hold up. That’s why they come to us. We never compromise on quality. We believe that every customer deserves a complete, proper repair, and that belief guides everything we do. From our accurate damage assessments to our flawless paintless dent repair techniques, our standards remain consistently high.
We also understand that life doesn’t pause just because your car took a hit. You’ve got work to do, places to be, and people who rely on you. Being without your vehicle, even for a few days, can throw off your entire routine. That’s why we place such a strong emphasis on accurate timelines, open communication, and clear expectations. You’ll know how long the repair will take, what’s being done, and when you can expect to be back on the road.
The cost of Paintless Dent Repair (PDR) can vary widely. Prices start from $100 for tiny (dime-sized) dents and can escalate to $1,000 for a particularly challenging larger dent.
The price is also influenced by the amount of removal and installation (R&I) work needed to reach the dent. Since PDR necessitates access to the panel's reverse side, the R&I effort varies based on the dent's location, its depth, and our ability to create access for the repair.
For instance, gaining access might sometimes require removing a car door and stripping its interior panel entirely, which would be costlier compared to simply inserting a tool via a wedge placed between the window and its molding to repair a dent on the same door.
At StormWise, when we evaluate the damage, the price we quote is comprehensive, including all the factors mentioned. You can rest assured there will be no unexpected costs when you collect your vehicle.
Absolutely, we can work with aluminum! Given its thicker composition, aluminum poses a greater challenge to repair than traditional high-strength steel panels. As the automotive industry increasingly turns to aluminum for its lightweight benefits and eco-friendliness, we encounter this question with growing frequency.
However, it's important to note that not all large dents in aluminum can be rectified using the paintless dent repair (PDR) technique. The best course of action is to bring your vehicle to us so our skilled technicians can assess the damage firsthand.
Additionally, it's crucial to be aware that aluminum panels incur a 25% mark-up. This is because smoothing out aluminum to perfection takes significantly longer compared to steel panels.
The Hail Group is dedicated to informing people about hail damage and its remedies. Indeed, hail damage can often be addressed and covered under a comprehensive insurance claim.
For vehicles valued at $10,000 or more with minor damage, hail repair is typically feasible through a comprehensive insurance claim, and such claims usually do not result in higher premiums. Conversely, for a vehicle worth around $6,000 that has suffered extensive damage from a hail storm—such as a cracked windshield, shattered rear glass, cracked paint, and damaged headlights and taillights—the repair costs, which might exceed $10,000 depending on the vehicle's year, make, and model, could lead the insurance company to deem the vehicle a total loss rather than cover the repair costs.
The most effective way to ascertain whether your hail damage can be repaired is to reach out to us for an evaluation. We can often determine the repairability of the damage and provide a rough cost estimate within just 5 minutes.
Definitely! Our expertise lies in handling automotive claims, particularly for paintless dent repair (PDR). We're more than willing to serve as your primary point of contact with your insurance company, sparing you the hassle.
For individual dent repairs, it's possible that the repair costs might fall below your insurance deductible. We cannot bypass deductibles for straightforward dent repairs, so we recommend getting an estimate from us first to determine if filing a claim is justified. If the dent is eligible for PDR and you're facing the standard $500 deductible, often the repair expense will be less than the deductible, making a claim unnecessary.
The solution really hinges on your expectations. Occasionally, customers come to us with dents that also feature a scratch or some form of paint damage. In these instances, they might simply want the dent removed. Subsequently, either they or we apply touch-up paint within the scratch to minimize the visual discrepancy between the scratch and the surrounding car paint.
It's important to note that this approach doesn't yield a flawless result—it's merely a touch-up. Naturally, this option is significantly less costly than the comprehensive repairs involving fillers and repainting offered by full-service auto body shops.
On the other hand, if your aim is to have a dent and its accompanying paint damage (such as scratches or cracks) repaired to pristine condition, then consulting with a full auto body shop is your best bet.
Regrettably, that's not possible. Bumpers are commonly constructed from plastic, and paintless dent repair (PDR) is not effective on plastic materials in the same manner it is on metal. Repairs on bumpers generally require the use of paint and filler for proper restoration.
In cases where the bumper is metal, it's often made from a very thick metal that is also incompatible with PDR techniques. For bumpers crafted from such materials, replacement is usually the only viable option when dealing with dents or other forms of damage.
Our skilled technicians are experts in the most advanced hail repair methods, guaranteeing that your vehicle receives top-notch care.
We prioritize your schedule by offering fast and reliable repair solutions, ensuring you're back behind the wheel in no time.
Ensuring your complete satisfaction is at the forefront of our efforts, and we aim to surpass your expectations through our exceptional workmanship.
Google Reviews
"Fine group of staff! Initially, I met Ben and Joe! I was sold on the service because of their professionalism! Later, I met Logan and Adrian. Great group to work with. I love the way my car turned out. It was worth the wait!"
"Completely awesome and great customer service. this is the second place i’ve been to trying to fix the hail damage on my car and they were the ones who could fix them the best!! like it never even happened!! awesome job!!"
"Amazing people and great service!! They were able to help get the dents out of my vehicle from a recent storm that had passed. Absolutely loved the experience, highly recommended!"
The cost of Paintless Dent Repair (PDR) can vary widely. Prices start from $100 for tiny (dime-sized) dents and can escalate to $1,000 for a particularly challenging larger dent.
The price is also influenced by the amount of removal and installation (R&I) work needed to reach the dent. Since PDR necessitates access to the panel's reverse side, the R&I effort varies based on the dent's location, its depth, and our ability to create access for the repair.
For instance, gaining access might sometimes require removing a car door and stripping its interior panel entirely, which would be costlier compared to simply inserting a tool via a wedge placed between the window and its molding to repair a dent on the same door.
At StormWise, when we evaluate the damage, the price we quote is comprehensive, including all the factors mentioned. You can rest assured there will be no unexpected costs when you collect your vehicle.
Absolutely, we can work with aluminum! Given its thicker composition, aluminum poses a greater challenge to repair than traditional high-strength steel panels. As the automotive industry increasingly turns to aluminum for its lightweight benefits and eco-friendliness, we encounter this question with growing frequency.
However, it's important to note that not all large dents in aluminum can be rectified using the paintless dent repair (PDR) technique. The best course of action is to bring your vehicle to us so our skilled technicians can assess the damage firsthand.
Additionally, it's crucial to be aware that aluminum panels incur a 25% mark-up. This is because smoothing out aluminum to perfection takes significantly longer compared to steel panels.
The Hail Group is dedicated to informing people about hail damage and its remedies. Indeed, hail damage can often be addressed and covered under a comprehensive insurance claim.
For vehicles valued at $10,000 or more with minor damage, hail repair is typically feasible through a comprehensive insurance claim, and such claims usually do not result in higher premiums. Conversely, for a vehicle worth around $6,000 that has suffered extensive damage from a hail storm—such as a cracked windshield, shattered rear glass, cracked paint, and damaged headlights and taillights—the repair costs, which might exceed $10,000 depending on the vehicle's year, make, and model, could lead the insurance company to deem the vehicle a total loss rather than cover the repair costs.
The most effective way to ascertain whether your hail damage can be repaired is to reach out to us for an evaluation. We can often determine the repairability of the damage and provide a rough cost estimate within just 5 minutes.
Definitely! Our expertise lies in handling automotive claims, particularly for paintless dent repair (PDR). We're more than willing to serve as your primary point of contact with your insurance company, sparing you the hassle.
For individual dent repairs, it's possible that the repair costs might fall below your insurance deductible. We cannot bypass deductibles for straightforward dent repairs, so we recommend getting an estimate from us first to determine if filing a claim is justified. If the dent is eligible for PDR and you're facing the standard $500 deductible, often the repair expense will be less than the deductible, making a claim unnecessary.
The solution really hinges on your expectations. Occasionally, customers come to us with dents that also feature a scratch or some form of paint damage. In these instances, they might simply want the dent removed. Subsequently, either they or we apply touch-up paint within the scratch to minimize the visual discrepancy between the scratch and the surrounding car paint.
It's important to note that this approach doesn't yield a flawless result—it's merely a touch-up. Naturally, this option is significantly less costly than the comprehensive repairs involving fillers and repainting offered by full-service auto body shops.
On the other hand, if your aim is to have a dent and its accompanying paint damage (such as scratches or cracks) repaired to pristine condition, then consulting with a full auto body shop is your best bet.
Regrettably, that's not possible. Bumpers are commonly constructed from plastic, and paintless dent repair (PDR) is not effective on plastic materials in the same manner it is on metal. Repairs on bumpers generally require the use of paint and filler for proper restoration.
In cases where the bumper is metal, it's often made from a very thick metal that is also incompatible with PDR techniques. For bumpers crafted from such materials, replacement is usually the only viable option when dealing with dents or other forms of damage.
